| ITEM/STANDARD |
FEATURES |
BENEFITS |
| Steel
Frame |
Galvanized
fabrication, plated fasteners |
Can
be built to any length with single drive system
All sections furnished pre-assembled
Modular construction allows for length modification |
| Hook
& Pin Connecting Joints |
Allows
up to 5° convex/2° concave angular change
per joint |
Easy
to install
Terrain-following |
| Support
leg Assemblies |
Manually
adjust up to 1m/36” high
Adjust/pivot to ground slope changes
Gravity pins secure legs
|
Can
be anchored to any solid surface (i.e. soil or timbers) -
no foundation required.
Offers season-long stability.
|
| Head/Drive
Section |
Length:1.8m/5’-11”
2.4m / 7'-11"
(40-60HP) |
Built-in
8° decline to facilitate discharge
Top hatch access to drive machinery
Includes walkway extension on each side |
 Drive
Pulley |
42.5cm-63.5cm/17”-25”
diameter (based on HP) |
Oversized
to offer optimal surface friction and traction |
| Drive
Motor |
Shaft-mounted
integral gearmotor, premium efficiency |
Uses
no sprockets, chains or V-belts
Low maintenance |
| Safety
Relief Plate |
Complies
with ANSI B77, Section 7:7.1.2.11.2
CSA Z98-01 Clause 9.6.3 |
Activates
E-Stop in event of interference with pinch point |
| Brush
Cleaner |
Nylon
bristle brush on return side of belt
Powered by 2HP motor |
Continuously
cleans belt of ice/snow while in operation.
Manual shut off to disengage. |
| Tail/Load
Section |
Length:2.4m
/ 7’-10’
Contains screw-type or automatic belt tension independent
of load variation + temperature. Hydraulic and gravity systems
offered. |
Set
level for smooth loading
Allows for 15° maximum angle from load platform to first
lift section |
| Tail
Pulley |
25cm-40cm/10“-14“
self-cleaning tail pulley |
Helps
to remove ice/snow from inside the belt |
| Intermediate
Sections |
3m/10’
long each
UMHW plastic slider bed
Continuous edge-guide system and return belt guides |
Modular
Design
Reduces belt friction
Ensures proper belt alignment.
Minimize freeze-up in adverse weather. |
| Belting |
Black
roughtop material 60cm/24",
750cm/30”, and 90cm/36" widths standard.
Carcass contruction based on length/motor power |
Provides
UV stabilization and high-grip surface |
| Electrical |
Pre-assembled
controls in NEMA 4 enclosure
AC Variable Speed Drive
Includes 9m/30’ wiring for remote mounting
Quick connects for motors and control power |
Factory
tested to ensure reliability
Worldwide support
Area choice of electrical input power |
| ITEM
/ OPTIONAL |
|
|
| Side
Walkway Extension |
45cm/18”
wide panels bolt to main conveyor frame
Artificial snow surface installed on top of panel |
Excellent
aid for grooming
Meets ANSI and CSArequirements for horizontal path width
|
| Surface
Tarpaulin |
18oz.
vinyl coated nylon material, custom sized
Perimeter grommets on 2’ centers |
Protects
system from elements year-round |
| Special
Electrical Requirements |
Accommodations
for special voltage requests, plugs, etc |
Flexibility
to customized are requirements.
UL/CSA ratings available. |
| Portable
Heat Mat |
Connects
to 120v terminal.
28" + 40" widths available. |
Significantly
reduce need for snow removal underneath lift |
| Belt
Heat |
Infra-red
heat system on the return run of the belt |
Further
reduce snow accumulation under the lift and keep belt snow-free |
| Canopy
/ Cover |
Variety
of finished available |
Offers
belt protection and reduction of snow removal time. |
| INCLUDED
WITH LIFT PURCHASE:
(3)
Sets, Engineering Packet, PE stamped, to Include:
CSA
+ ANSI Requirements and Pre-installation Criteria
Technical
Specifications and Analysis
Acceptance
Test Procedure
Component
Specifications
Mechanical
Component Drawings
Electrical
Schematics
(1)
User Manual to include installation and Operation Instructions
AREA
RESPONSIBILITIES:
Site
preparation and mechanical installation
Third
party engineer review for state / Provincial compliance,
if necessary
Electrical
field wiring
Freight,
FOB factory
Applicable
taxes |
